These two are methods of printing important information on the packaging of the product or even printing receipts. Direct thermal transfer ribbons out the information directly on to the material. The current transmission ribbon, however, involves the information being melted on to the back of the ribbon and being imprinted on to the front.
Current print head life and its cost. In direct current transmission as the name hints, the print material is to be in direct contact with the label material as it is pulled across the printing head. On the other hand, thermal transmissions are designed with a back-coating to reduce the friction. Less friction and static means less wear and tear.
With the direct current transmission, it is not the same. The dust and debris that may be present in the labels are in direct contact with the print head. In the process of being pulled across the print head, they may burn or physically damage the elements. In the long run, you will have printed out poor quality or premature print head failure.
The printer configuration. There are printers that can do both direct and current transmissions. You can have such and choose which one you prefer. However, there are the printers specifically made for the direct current transmission. These are more affordable as they do not have all the hardware needed to support transmission ribbons. This also saves on time as you do not have to constantly change ribbons.
There are both coated and uncoated direct thermal printers. Many people assume that the coated ones are of the best quality and therefore consider only this factor when purchasing the machine. They forget that there are some inferior brands that also have coated printers. In the long-run, they end up spending a lot more on repairs than they would have on an original high-quality printer.
No two products are similar. Even the same brand is bound to have different models. The different models have qualities that make them different from each other. For example, the printers use various amounts of heat and speed. For the best results, go for maximum speed and minimum heat. Too much heat may damage the printing.
The results of the two methods last different periods of time. As you choose, consider for how long your product will last in the market. You do not want to have faint writings on a hazardous product as it may cause a lot of damage to the user. The current transmission printing lasts a lot longer than the direct printing and is, therefore, best for goods that may take long to sell.
There has been a lot of waste in the environment which has led to its depletion. As you settle for a method, make sure you have considered the environment. The thermal ribbon uses chemical bases which may cause harm to the environment. The direct method, however, is safer because it does not use the ribbon.
Current print head life and its cost. In direct current transmission as the name hints, the print material is to be in direct contact with the label material as it is pulled across the printing head. On the other hand, thermal transmissions are designed with a back-coating to reduce the friction. Less friction and static means less wear and tear.
With the direct current transmission, it is not the same. The dust and debris that may be present in the labels are in direct contact with the print head. In the process of being pulled across the print head, they may burn or physically damage the elements. In the long run, you will have printed out poor quality or premature print head failure.
The printer configuration. There are printers that can do both direct and current transmissions. You can have such and choose which one you prefer. However, there are the printers specifically made for the direct current transmission. These are more affordable as they do not have all the hardware needed to support transmission ribbons. This also saves on time as you do not have to constantly change ribbons.
There are both coated and uncoated direct thermal printers. Many people assume that the coated ones are of the best quality and therefore consider only this factor when purchasing the machine. They forget that there are some inferior brands that also have coated printers. In the long-run, they end up spending a lot more on repairs than they would have on an original high-quality printer.
No two products are similar. Even the same brand is bound to have different models. The different models have qualities that make them different from each other. For example, the printers use various amounts of heat and speed. For the best results, go for maximum speed and minimum heat. Too much heat may damage the printing.
The results of the two methods last different periods of time. As you choose, consider for how long your product will last in the market. You do not want to have faint writings on a hazardous product as it may cause a lot of damage to the user. The current transmission printing lasts a lot longer than the direct printing and is, therefore, best for goods that may take long to sell.
There has been a lot of waste in the environment which has led to its depletion. As you settle for a method, make sure you have considered the environment. The thermal ribbon uses chemical bases which may cause harm to the environment. The direct method, however, is safer because it does not use the ribbon.
About the Author:
You can get excellent tips on how to choose a supplier of thermal transfer ribbons and more information about a reputable supplier at http://www.vantageid.com/product-category/label-ribbon-supplies/thermal-transfer-ribbons right now.
No comments:
Post a Comment